Laboratory Mechanical Ring Roller Mill for Sale is an industrial equipment. With the development of society and the needs of people's lives, the industrial community is getting bigger and bigger, fine, purity, and pass rates for various fine powder. Requirements are also increasing, and the application of classification machines is increasingly wide.
What factors affect the performance parameters used by Laboratory Mechanical Ring Roller Mill for Sale?
The following is a detailed description:
1. Feed particle size control
Most Laboratory Mechanical Ring Roller Mill for Sale has certain upper limit requirements for the feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium
Currently, the working medium of Laboratory Mechanical Ring Ring Ring Ring Ring Roller Mill for Sale is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed
Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Granular limit
Laboratory Mechanical Ring Roller Mill for Sale In the pulverization process, as the material particle size is reduced, the crystallization and strength of the material increases. After reaching a certain degree, the materialThe particle size is no longer reduced or reduced, that is, the crush limit of the material is reached.At this time, the material specific surface area increases, the surface activity of the particles, the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.
ALPA lithium carbonate Laboratory Mechanical Ring Roller Mill for Sale case Share: This customer is a company in production, selling lithium carbonate, lithium hydroxide, potassium sulfate, and salt, etc.In the process of selling lithium carbonate, it is found that the current customer needs is ultrafine powder of lithium carbonate, so it upgraded the production line of lithium carbonate, purchased our AlPa's multiple Laboratory Mechanical Ring Roller Mill for Sale.
Technical parameters:
Production capacity: 450kg
For superfine grade machines, precision classifiers, jet grading machines and other equipmentIf you have a wish, you can contact us directly, the product quality is guaranteed, the price is fair, the service is improved, you are welcome to come to buy!
