Laboratory Turbo Mill Pulverizer is an industrial equipment. With the development of society and the needs of people's lives, the industrial community is increasingly demanding various fine powders, and the details of fineness, purity and pass rate are also The higher, the application of the classification machine is also more extensive.
Laborative Turbo Mill Pulverizer has a wide range of smudged granularity, simple and convenient operation, but during the pulverization process, there is often a case where the crushing effect is different.
The crushing effect is mainly affected by the following factors:
The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.
When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
Technical parameters:
finished particle size: D90: 400 mesh
Production capacity: 400kg / h
