With the continuous advancement of pulverizer technology, Cell Grinder for Oil Fracturing Proppant has been familiar with people. The most popular crushing equipment is now the Cell Grinder for Oil Fracturing Proppant. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.
What is the design structure of Cell Grinder for Oil Fracturing Proppant?
Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, the performance of Cell Grinder for Oil Fracturing Proppant is steplessly adjusted, the granular weight of the grading weight can reach D97 ≤ 3 ≤ 150 microns, suitable for fine grading of dry micro-product.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.
ALPA cobaltate Cell Grinder for Oil Fracturing Proppant case share: Beijing Lithium Electric Materials Company purchased a Cell Grinder for Oil Fracturing Proppant from our AlPa in 2020. Ultrafine pulverizer for lithium cobaltate, the company has three particle size requirements for lithium cobaltate, requires a device to be simultaneously satisfied. In response to the company's unique needs, our ALPA engineers have been working hard to customize a Cell Grinder for Oil Fracturing Proppant. The pulverizer can meet the production requirements of multiple particle size sections, equipped with subsequent airflow classifier systems, and can be sorted by different particle size products.
Technical parameters:
Production capacity: lithium cobaltate small particles: 250kg of lithium cobalt acid lithium large particles: 500KG three yuan: 500kg
How to solve the problem of Cell Grinder for Oil Fracturing Proppant's noise?Let's take a look.
1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.
3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.
In addition to Cell Grinder for Oil Fracturing Proppant, ALPA Technology Co., Ltd. also supplies powder grading machines, ultra-fine classifiers, precision classifiers, ultrafine airflow classifiers, jet grading machines, etc.Welcome to buy!
