In the rapid development of rapid development, many people have a certain understanding of Rotor Mills of SulfamiC ACID, and crusher technology is in an absolute leader in the industry.
Rotor Mills of Sulfamic ACID provides power by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product. In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize.
The air pulverizer has an upward nozzle under the bottom of the pulverized chamber, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by a nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.
ALPA Baby Rotor Mills of Sulfamic ACID Case Sharing: The company is a chemical enterprise, it is necessary to make ultrafish smashing on small soda, investigate a number of powder equipment enterprises, and finally chose our alpa's Rotor Mills of Sulfamic ACID.
Technical parameters:
Production capacity: 10-220kg
Installation, operation and maintenance is three important factors using Rotor Mills of Sulfamic ACID . The wear and consumption of each operation has always been a key factor in each startup operation. In order to use the airflow pulverizer for a long time, please adjust the open mode. Boot is a standard, for the first time to contact and use this kind of equipment, it is always a very strange state. In fact, it is very simple, the best way is to familiarize yourself with the consumer content on the instructions or have no use value. Timely specification and familiar. After each startup, check the airflow pulverizer in time to develop good usage habits. In the future, IThey don't need attention and familiarity.
The airflow pulverizer has improved and improved from the design and component combination, gave us a lot of help.It is good quality, but it is also declined for a long time without maintenance and maintenance.Check the operating components, electrical components, and transmission.Once an abnormality occurs, please repair it in time, without a fault, gas mill, prevent accidents.
