Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Hammer Crusher For Peony Petals can effectively improve the level of massage of materials and greatly improve productivity. Hammer Crusher For Peony Petals received attention, and the prospect was also optimistic about many people.
Hammer Crusher For Peony Petals:
Using high pressure airflow with animal material to smash, ensure the purity of the material, facing individual hardness, high materials, can use high hardness ceramic corundum as crushing The cavity, greatly reducing the wear of the material on the pulverizer to ensure that the purity of the material is low temperature and low temperature, and the inert gas can be pulverized, such as nitrogen, carbon dioxide, is suitable for high activity, flammable and explosive non-metallic mine powder.
High capacity, fast efficiency; compared with other ultra-fine pulverizations of the same capacity, because of the continuous feed of Hammer Crusher For Peony Petals, continuously pulverized, continuous recovery, the characteristics of continuously improvement increases, With the mode of automation control, the advanced level is much higher than other devices.
The structure is simple, the disassembly and cleaning is convenient, there is no need to lubricate oil, etc.
The product is fine, the particle size distribution is uniform, and the hierarchical effect of Hammer Crusher For Peony Petals comes with excellent ultrafine powder fineness and distribution, and then cooperate with Hammer Crusher For Peony Petals. Use more to make the product particle size and distribution far better than the processing of other equipment.
Welcome to the majority of major manufacturers in Xixia stone powder to visit, and collective experiments.
1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.
2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
3, for easyLoss for regular inspections, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation.When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours.The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease.Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.
