Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Rotor Crusher Of Powder can effectively increase the level of massage of materials and greatly improve productivity. Rotor Crusher Of Powder has received much attention, and the prospect has also been optimistic about many people.
High Temperature Rotor Crusher Of Powder performance characteristics:
1, the content classification device, the product particle size D97: 8-150 microns can be adjusted, the particle shape is good, the particle size distribution is narrow.
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.
ALPA baked wheat Rotor Crusher of Acid Powder case sharing: This customer is a seasoning company, in the production process, it is necessary to use a wheat that can be subjected to ultrafine pulverization after baking wheat. device of. Investigate a number of domestic enterprises in China, and finally chose our Alpa as partners, and purchased the Rotor Crusher of Acid Powder from us.
Technical parameters:
finished particle size: D99.9: 180 mesh
Production capacity: 400kg
Let's talk about how to use Rotor Crusher's method
[123 ] First, prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, whether it works fine.
Second, open
1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feeder - Main valve - Compressor - Stepper wheel Motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor.
Fourth, repair
1. The motor should be lubricated regularly, but the grease should not be too large.The bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.
V. Note
1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.
In addition to Rotor Crusher Of Powder, AlPa Technology Co., Ltd. also supplies powder grading machines, ultra-fine classifiers, precision grading machines, ultrafine air grade machines, jet grades, etc. Welcome to buy!
