In the classification operation of industrial production at this stage, the use of Vibration Mills for Silicon Alloy Powder is mainly targeted by solid particles. It is also a commonly used pulverized equipment in the ultrafine pulverization process. .
In the production process of crushing using the Vibration Mills for Silicon Alloy Power, the ultrasonic air flow generated by the device can constantly collide between the materials, and this supersonic airflow can also be used for raw materials. A good impact is produced, and then the material can also achieve a good crushing effect with the inner wall of the equipment.
AlPa Cassava Starch Vibration Mills for Silicon Alloy Powder case Share: This customer is a new panel industry, dedicated to providing professional and excellent plywood new filler for plywood industry customers. The company needs to be used in the production process of the company. Multi-party examine, finally purchased the CSM1100-V mechanical grinder from our AlPa. Technical parameters:
finished particle size: 98% over 325 mesh
Production capacity: 2T
1, Chinese medicine shredder should be more smooth and easier to use.
2, before the traditional Chinese grinder work, clean processing materials must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults.
3, before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work.
4, turn on the power supply, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag.
5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is normal, it is not easy to damage, and the production efficiency is high.
