Most of the product production and processing of products in the current stage, using Ring Roller Mill of Asphalt, the use of Ring Roller Mill of Asphalt is a very common way of processing, accompanied by the continuous improvement of scientific productivity, and the technology of grading equipment It is also imminent to replace. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.
Ring Roller Mill of Asphalt has several types: flat gas flow grinding, fluidized bed flame mill, circulating tube gas flow mill, jet gas flow mill and target gas flow grinding. The main performance characteristics of the pulverizer:
1, the airflow pulverizer includes a vertical pulverizer. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. It can be used in series with a multi-stage crusher and produces a product having multiple particles.
2, the airflow pulverizer is easy to disassemble, the inner wall is smooth, no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
3, the airflow pulverizer control system adopts program control, easy to operate.
AlPa Quartz Powder Ring Roller Mill of Asphalt Case Sharing:
Silicon Microfubin Company's main products include molten stone sand, molten silicon fine powder, soft composite silicon fine powder, high purity ultrafine silica, active silicon fine powder, Crystalline silicon fine powder, spherical silicon fine powder and other specifications are complete.
Main uses: Photovoltaic solar industry and electronic package materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.
Product particle size: Remove 20UM with fine powder
hour yield: Sylectivity 60-90%
How to continuity RING ROLLER MILL OF Asphalt life? Here are the following aspects:
1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.
2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7,The spiral feeder is 4,000 hours, plus ordinary calcium based grease.
Shan Dong Alpa is committed to Ring Roller Mill of Asphalt, has a mature process, strong technical strength, specializing in Ring Roller Mill of Asphalt, survive by quality, welcome everyone to come to consult.
