Impact Mills for Starch

In this economically flourished area, there are many people who know the airflow pulverizer, Impact Mills for Starch technology is in a leading position in the same industry.

Impact Mills for Starch is mainly after accelerating compressed air or inert gas, using high-speed elastic fluid (300 to 500 m / s) or overheating steam (300 to 400 ° C) to make the particles There is a strong impact, shear, collision, friction such as a gas and particles, and other components, and the like, at the same time, it is combined with the graded machine under the action of the airflow rotation or with the classifier. The particle grading achieves ultra-fine pulverization.

Impact Mills for Starch is a common preparation method of pharmaceutical powder, suitable for antibiotics, enzymes, low melting points, and other thermal drugs. With the continuous advancement of ultrafine pulverization technology, it will play an increasingly important role in the pharmaceutical industry.

ALPA Tie Powder IMPACT MILLS for Starch Experiment: Tallar Grading Machine is the often used in the production of talc, and our AlPA classifier has excellent performance, and there are many talc production companies to come to our company. Perform talc grading experiments. Product particle size: 230kg / h

Our alpa classifier can meet the slide grading requirements of different yields of different granular sections, if you have a talc grade demand, it is not sure that the grading granularity can not be Implementation, please contact our customer service, we will contact you in the first time and verify that you can achieve your hierarchical needs.

Do you know how do Impact Mills for Starch correctly? I hope the content below can help you.

1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.

2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1)Regularly lubricate the eddy current pulverizer, but the lubricant should not be too large to prevent the bearing temperature too high.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

If you still have questions, you can directly contact the ALPA Technology Co., Ltd., warmly welcome users to come to consult, our company equipment is manufactured, the size is complete, there is a suitable for you!