Rotor Crusher For Carbon Ball plays a vital role in the current industrial production. In major minerals, chemical industry, pharmaceutical industry, food manufacturing industries are widely used. With the continuous development of Rotor Crusher For Carbon Ball, the various major industries are particularly medical, the food industry has put forward new purity in the pulverization process. Requirements, it is desirable that the powder can be kept clean. In traditional Rotor Crusher For Carbon Ball, carbon steel, stainless steel is generally used as the lining material of Rotor Crusher for Carbon Ball.
The Rotor Crusher for Carbon Ball has the characteristics of small size, light weight, high efficiency, no dust, cleaning, easy to operate, beautiful modeling, etc.
The pulverized groove and the blade are made of stainless steel. It can complete the coarse crushed and fine powder in 3 seconds to 2 minutes. It can quickly crush a variety of Chinese herbal medicines and most of the food, wide and wide, and different properties. It is very well pulverized, and the material is losses, and the dissection of different materials will not be strooked.
such as Western ginseng, ginseng, three seventh, placenta, baui, pearl, white peony, 苡 苡 米, green beans, soy, sesame, rice, corn, etc.
In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.
Rotor Crusher For Carbon Ball uses a lot, I want to know more about the ultra-fine gantry classifier, welcome to consult with us!
