In numerous pulverization mode, Impact Mill of Wax Powder has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.
High-temperature Impact Mill of Wax Powder performance characteristics:
1, the content classification device, the product particle size D97: 8-150 microns can be adjusted, the particle shape is good, the particle size distribution is narrow.
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.
AlPA cerium oxide Impact Mill of Wax Powder case sharing: The customer is a research institute in a well-known university in China, and the cerium oxide is ultrafinely pulverized during the study. Buy our AlPa Impact Mill of Wax Powder.
Cerium oxide mechanical milling machine technical parameters:
finished particle size: 200-2000 mesh
Production capacity: 10-30kg
As a crusher, Shandong AlPa has been working to customers Provide greater value, the fineness, production capacity, and installation venues of each project are important information for custom selection, pre-sales service, 24-hour online customer service to answer questions, provide ideal communket production line solutions And accordingly, it provides the factory quotation to increase the escort for the cerium oxide crushing project.
In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. Use four or fiveAfter a month, new oils should be replaced.
Shan Dong Alpa specializes in the production and development and service of Impact Mill of Wax Powder product technology, welcome to consult.With perfect quality, excellent service, the most affordable price, customers provide the best products and services for customers.
