Rotor Grinder for Ternary Materials

Rotor Grinder for Ternary Materials is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is fine, and the particles are delicate, affordable.

The Rotor Grinder for Ternary Material is convenient to operate, easy to maintain, and has a high grinding speed in the same product. At the same time, low energy consumption is the lowest in similar products. Products having the same particle size do not have functional, flammability, explosive, and oxidative materials that have particulate formation and particle dispersion, and oxidative materials can be used as a medium to achieve a closed pulverization and inertia. The loss of use of sex gas circulation is low. Negative pressure production can effectively reduce dust pollution, improve the working environment, compact structure, and seamless welding technology internally, which is easy to mechanically maintain and mechanically cleaning.

Since the high pressure gas is ejected from the nozzle, the gas stream causes the animal material to collide, shear, and friction, thereby achieving the crushing effect. Since the gas and the high speed of the animal material have a large centrifugal force. Under the effort of galvance, the crude particles were sent to the crushing room for multiple comminution, and the fine powder was discharged from the center exit.
ALPA Trimata Rotor Grinder for Ternary Materials Case Sharing:

A electromechanical company is mainly committed to production equipment such as push booth, roller furnace, mesh furnace and other products, and products are widely used in new energy Battery, electronic components and other fields. The company has always adhered to the principle of \"people-oriented, innovation first\". The company has established a good relationship with multiple international companies. With exquisite technology, we will have our customers' support and trust. We will give back to our customers with quality products and services to make better contributions to electromechanical needs.

Case parameters:
Product particle size: D50: 15μm
Hour Yield: 600kg

Ultrafa Rotor Grinder for TerNary Material Materials:

1, Ultrafine Crusher and The power unit should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.

2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the working efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

ALPA is a manufacturer dedicated to powder grading machine, precision classifier, laboratory grade machine, and we have years of production experience in the production of products, while in many mechanical productsWe also have achieved a lot of important breakthroughs in the field, and believe that you will be the primary choice for your product purchase.