Ring Roller Mill of Andesite PlagioClase is good, just need to be produced in a smooth ground, low noise, can avoid dust leakage during the pulverization process, favored by the powder industry.
Ring Roller Mill of Andesite PlagioClase starts research from the following aspects:
1. Strengthen basic theoretical research, optimize process flow
Strengthen basic theory research Guide equipment's independent innovation development, and based on existing equipment, vigorously develop research and optimize process processes. For mass-produced powders, special models can be developed.
2. Improve stand-alone production, reduce unit product energy consumption
With the increasing demand for ultrafine powder products, especially large-scale dosage users increase and product quality The continuous increase in stability requirements has continued to rise for large equipment market demand. Large-scale equipment can more effectively adapt to the development trend of ultrafine powder processing and gradually expand the scale, and there is also many advantages in the energy consumption of unit products, excellent product quality and convenient management.
3. Improve product fineness, enhance the device pulverization limit
The ultrafine powder processing equipment and technical demand for particle diameter at 1 μm or less is getting stronger. Ultrafine powder will be a very important development trend in the field of ultrafine powder in the future. This is mainly due to the current large amount of high-tech and the development and production of new materials. For example, in terms of environmentally friendly building materials, the development of biomedicine materials, etc..
4. Online regulation of product fineness and particle size distribution
This development is a prerequisite requirement for ultrafine crushing lines to achieve intelligent control. Strengthen automatic control and online testing equipment and related software developments and related software in order to improve the level of equipment and reduce energy consumption.
ALPA Battery Ring Roller Mill of Andesite PlagioClase Case Sharing:
A new material company is a modern high-tech private enterprise integrating R \u0026 D, production and sales. The company teamed up with the research team of many universities to transform the international leading patented technology to high-tech products, filled the domestic technical gap. The company will rely on lithium-electric positive material materials as the core, with its company to form an interrelated, left and right support, collaborative support, comprehensive utilization cycle industrial chain.
Case parameters
Hour Yield: 200-300kg
How to continuity Roller Mill of Andesite PlagioClase life? Here are the following aspects:
1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.
2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.
If you have the situation about other crushers, you want to know, welcome to consult!
