With the development of society and life, the demand for Ring Roller Mill for Attapulgite is getting bigger and higher in the industry, and the requirements for fineness, purity, and pass rate are increasing. In the current market, there is a great development space.
Ring Roller Mill for Attapulgite is wide, simple and convenient, but during pulverization, there is often a case where the crushing effect is different.
The crushing effect is mainly affected by the following factors:
The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.
When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
Technical parameters:
Finished particle size: D50 less than 325 mesh
Production capacity: 300kg
1. Properties of the material.
In general, the pulverizer can accommodate all brittle materials, but due to the different material properties, the pulverization performance is also different. Due to the intensity, density, hardness, viscosity, shape and electrical performance of different materials, inevitable The difference in crushing effect is caused, wherein the strength of the material is an important factor, while the material that is too high can also result in a decrease in the life of the gas flow grinding.
2. Use time.
If the crusher is working continuously, it will also affect the service life of gas flow grinding, greatly increasing its failure probability.
The RING ROLLER MILL for Attapulgite produced by AlPa is a high quality device, supports customization, devicesComplete model, high efficiency, low energy consumption, easy operation, consultation in 24 hours!
