Vibration Grinder for Glass SLAG is a crushing equipment commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.
Vibration Grinder for Glass SLAG should be installed in a place where the site is flat.
Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, you can work on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.
When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.
A energy company is a battery positive material production enterprise, with multiple production bases. The company's business scope includes new materials and main products research and development, battery materials and their accessories research, etc. The top of the list.
Case parameters:
Product particle size: D50: 15μm
Hour Yield: 300kg
Before the device is turned on, the connection site, seal and The line and the like are meticulously check, and everything is not a problem before you can run the powder classifier.
The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.
