Rod Pin Mill Machine for Ferroalloy

Rod Pin Mill Machine For Ferroalloy can be used in the current stage of industrial production process, and AlPA has been committed to the development and application of equipment such as grading machines for many years. The classifier has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs in a large range.

What is the design structure of ROD Pin Mill MACHINE for Ferroalloy?

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, and the performance of the ROD PIN MILL MACHINE for Ferroalloy can be adjusted. The granular weight of the grading weight can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.


ALPA Peel Peas Rod Pin Mill Machine for Ferroalloy Case Sharing: The company uses the food professional processing enterprises in R \u0026 D, processing, and sales, and has discovered the ROD PIN of our alpa. Mill Machine for Ferroalloy meets all needs.
Technical parameters:
Production capacity: 2T +/- 10%

Let's learn about the Knowledge of Rod Pin Mill Machine for Ferroalloy Lubricants.

Select ROD PIN MILL MACHINE for Ferroalloy Lubricant Products to select the type and label of the lubricant according to the instructions on the device manual. General Rod Pin Mill Machine for Ferroalloy equipment manufacturer's lubricantProduction and use are not clear. This requires we choose in actual work. According to the work conditions of the equipment. For machines with higher temperatures, high viscosity oils are used, ensuring the thickness of grease under normal operating conditions, ensuring smooth flow of lubricants in low temperature environments; when the mechanical working speed is high, the viscosity is selected. Smaller oil ensures good permeability and fluidity. If the grease is too thick at this time, it will increase the operational resistance. When the load is relatively large, the oil having a slightly high viscosity should be used to ensure the thickness of the grease.

When purchasing ROD PIN MILL MACHINE for Ferroalloy lubricants, they should help their physical properties and chemical properties such as viscosity, flash point, corrosion resistance, etc., but also combined with manufacturers, considering comprehensive benefits and Under the premise of management benefits, minimize the type and quantity of oils as much as possible to reduce financial costs. The storage of lubricants and storage of oil plays an important role in the performance of the oil. When the lubricating oil is in contact with the non-ferrous metal, it will oxidize, which affects its performance, and corrosion during use, causing damage to the machine. Therefore, in the storage process, it should be avoided in contact with copper. The barrel oil should be kept cleaned and ventilated, protected from light. The storage time of lubricating oil should not be too long to avoid deterioration.

The above is the knowledge of the pulverizer lubricant purchased by Rod Pin Mill Machine for Ferroalloy

Shan Dong Alpa specializes in the production of Rod Pin Mill Machine for Ferroalloy product technology Welcome to consult with development and service. With perfect quality, excellent service, the most affordable price, customers provide the best products and services for customers.