In many crushing methods, Vibration Mill Machine of Feni has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.
For the service life of Vibration Mill Machine Of Feni, it has always been kept in mind, and it is necessary to keep in mind.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Vibration Mill Machine Of Feni is cleaned in time after use. Maintain the internal cleaning of the Vibration Mill Machine of Feni to avoid oxidation of the material and the inner contact.
ALPA Soybean Vibration Mill Machine of Feni Case Sharing: The customer is a company in the Netherlands. The company needs ultrafine pulverization to soybean meal (after oily oil). Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance. Through the incoming experiment, the company chose our company's Vibration Mill Machine Of Feni.
In order to achieve better use, you must also pay attention to the daily maintenance of Vibration Mill Machine of Feni, pay attention to the following:
2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production. 4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), noThen the bearing temperature is too high.
All Vibration Mill Machine Of Feni produced by AlPa is a high quality device, which supports customization, equipment models, high efficiency, low energy consumption, easy operation, 24 hours can consult!
