In this economically flourished area, many people know that Rod Pin Mill Machine of Peony Petals, crusher technology is in a leading position in the same industry.
In the production process of crushing using ROD Pin Mill MACHINE OF Peony Petals, the ultrasonic air flow generated by the device can constantly collide with the material, and this supersonic airflow can also be The raw material produces a good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.
Alpa Aluminate Rod Pin Mill Machine of Peony Petals Sharing: The company discovered that domestic ultrafine pulverized equipment, which has been flattened with similar companies in foreign countries. And the price is more advantageous than foreign similar import companies. Finally, our Rod Pin Mill Machine Of Peony Petals was purchased as a production equipment. Technical parameters:
Finished granularity: D97: 20μm
Production capacity: 100kg
1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.
