Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Impact Mill Machine for Bisphenol A can effectively improve the level of massage of materials and greatly improve productivity. Impact Mill Machine for Bisphenol A is highly concerned, and the prospect has also been optimistic about many people.
Impact Mill Machine for Bisphenol A is in full closed state, the pulverized particles are fine, the granular shape is good, the output is also large, the pulverization process is no dust production, and the material is purity is high after crushing. Raw materials. Impact Mill Machine for Bisphenol A can reach the effect of cell breakage during the pulverization process, which greatly increases the effective component dissolution of the medicinal material, and the efficacy is also easier to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.
ALPA lysophosphate Impact Mill Machine for Bisphenol A Share: This customer is expanding in the production process, through comparison discovery that the performance of our ALPA's phosphate special crusher is no longer better than domestic and foreign powders. The same type of equipment in physical equipment is poor, and even in some aspects there are unique advantages. After experiment, the company purchased the Impact Mill Machine for Bisphenol A.
Technical parameters:
Finished particle size: D50: 3μm
Production capacity: 400kg
The reason for the vibration and solutions of Impact Mill Machine for Bisphenol A can be carried out from the following aspects :
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation.The solution is to school straight or replacement.
6, the bearing gap exceeds damage.It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running.The solution is tightening.
The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.
