In many crushing methods, Ring Roller Mill Machine for Dichloromethane has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. Especially suitable for crushing drugs such as contaminated materials.
Ring Roller Mill Machine for Dichloromethane's temperature is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
AlPa Quartz Powder Ring Roller Mill Machine for Dichloromethane Case Sharing:
A mining company specializes in the development and production of stone-shaped sand, silicon powder,
company produces various models, various quality indicators Quartz sand and water washing dry stone sands are widely used in: glass and glass products, metallurgical manufacturing, cast steel, precision casting, furnace materials, refractory materials, ceramic glaze, ceramic billet, rubber, coating, etc., welcome to find , Guide, negotiate business!
Product particle size: D100: 11.5UM
Hours Yield: 380kg
1, Check if the lubrication of the bearing is good
2. Check if all fasteners of the pulverizer are fastened.
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.
Welcome everyone to visit Shandong AlPa website, company specializing in RiNG Roller Mill Machine for Dichloromethane Product Technology Production and Development and Service, High Energy Technical Experts, professional after-sales service team solves the worries of customers.
