Rotor Pulverizer Of Silicon Carbon is good, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.
Rotor Pulverizer of Silicon Carbon technology is designed and manufactured in the classification wheel.
There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.
The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.
ALPA Baked Wheat Rotor Pulverizer of Silicon Carbon Case: This customer is a seasoning company, which requires a device that can use a micro-pulverized wheat after baked wheat during its production. Investigate a number of domestic enterprises in China, and finally chose our AlPa as partners, and purchased Rotor Pulverizer of Silicon Carbon from us.
Technical parameters:
Finished granularity: D99.9: 180 mesh
Production capacity: 400kg
Super Micro Rotor Pulverizer of Silicon Carbon's correct usage:
1, super micro The crusher and power unit should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Power machine andWhether the shredder is lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
If you have something about other crushers, you want to know, welcome to consult!
