With the continuous development of pulverizer technology, Cell Mill Machine for thermosetting plastic has gradually penetrated into people's daily lives.
Cell Mill Machine for Thermosetting Plastic should be installed in a place where the site is flat.
Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.
When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.
ALPA Carbon Cell Mill Machine for Thermosetting Plastic Case Sharing: The company needs to super fine and fine pulverized in the production of static pressure graphite. After multi-party investigation and experiment, finally selected our AlPA as a cooperative customer, we provide the Cell Mill Machine for Thermosetting Plastic to which it provides, the need for carbon crushing particle size, particle size range, yield and other needs.
Finished granularity: D65: 200 目
Production capacity: 800-1000kg
Cell Mill Machine for thermosetting plastic is a more accurate machinery, in daily Some details still need the operator's attention during use and maintenance. In order to improve the pulverization efficiency of gas flow mill, it is necessary to check whether the feedstock meets the requirements before the production, and the foreign matter is strictly prohibited into the raw material.
In addition, the feeding speed must remain uniform and stable, don't be too fast or too slow.
If the feeding speed is too fast, the device will overload.
Regular maintenance equipment, frequently check whether the air supply pressure needs pressure required, as well as airflow mill, equipment running 3000 hours, or long-term shutdown and long-term storage, should be cleaned in a timely cleaning grinding machineThe nozzles and the inner walls of the grinding chamber and attached to the material grading portion to prevent the influence of gas flow grinding on the grinding effect.
If there is related requirements, please call us!
