The airflow pulverizer plays a vital role in the current industrial production. In various major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of airflow crushers, the various major industries are particularly medical, and the food industry puts forward new requirements in the pulverization process. It is desirable that the powder can be kept clean. In the manufacture of traditional airflow pulverizer, carbon steel, stainless steel is generally used as the lining material of the airflow pulverizer.
In terms of airflow milling, it is important to understand its operational rules, which is very important because only familiarize the procedure, can operate correctly.
1. Hammer Mill Machine Of Zinc Oxide's operation rules are as follows: After the preparation before the boot receives the production order, prepare materials. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, Hammer Mill Machine OF ZINC OXide starts the motor, control the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, the closure and inspection of Hammer Mill Machine OF ZINC OXide is as follows: After the material in the grinding machine housing is completely pulverized, the motor should be stopped and turned off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.
ALPA lithium iron phosphate Hammer Mill Machine of Zinc oxide case share: This customer is expanding the production process, through comparison, discovering the performance of our ALPA's lithium iron phosphate special crusher, etc. It is no longer than the same type of equipment in other powder equipment companies at home and abroad, and even in some aspects there are unique advantages. After experimenting, the company purchased Hammer Mill Machine of Zinc Oxide.
finished particle size: D50: 3μm
Production capacity: 400kg
Hammer Mill Machine of Zinc Oxide's motor conservation measures
1, check whether the lubrication of the bearing is good
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.
Shan Dong Alpa is committed to Hammer Mill Machine of Zinc Oxide, has a mature process, strong technical force, specializing in crusher research and development, survive with quality, welcome everyone to consult.
