With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of changing market, there is only constant innovation, continuously improve your technical level, and constantly improve your own products can make the Rod Pin Mill Machine for Garnet industry has a broader development space.
A rod Pin Mill Machine for Garnet costs, if you want to use Rod Pin Mill Machine for Garnet for a long time, please pay attention to the following:
1. During the production process It should often check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should stop the examination, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. 5.Rod Pin Mill Machine for Garnet Host and level distribution bearings are lubricated with special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a seven point introduction to the daily maintenance of Rod Pin Mill Machine for Garnet.
AlPa Steel slag ROD PIN MILL MACHINE for GARNET Case Sharing: The customer is a steel slag re-use technology company, which is mainly engaged in steel slag sorting project. Through the experiment, our AlPA classifier reached customer needs.
Product particle size: D80: 23.4
Yield: 175kg / h 加量
Rod Pin Mill Machine for Garnet's dust leakage problem, you can from the followingTreatment
1, install the dust removal equipment. For the dust generated by the high-temperature pulverizer, foam dust removal, wetting agent dust removal, ultrasonic atomization technology, composite filter bag dust removal, folding dust release bag, wide spacing electric precipitator dust removal. The user can also consider the overall performance of dust removal, so combined dust removal is used.
3, increasing the humidity of the equipment operation area, strengthening ventilation, storing fire equipment, avoiding a large amount of dust inhaling the harm caused by the human body.
4. Production enterprises should be equipped with corresponding protective supplies as required for air compressor operators. The operators should also wear protective supplies in accordance with regulations.
5, do a good job in the maintenance and management of existing dust equipment, guarantee its normal operation and use dustproof. The maintenance management of high temperature crushers seems simple, and actual operation requires good attitude and habits.
Shandong ALPA airflow crusher price, quality is more than German brand, environmental protection, granularity concentration, explosion-proof dustproof. Welcome to inquire.
