Most of the product production and processing in the current stage uses Ring Roller Mill Machine for Silica Fume to perform product, the product, is one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, grading equipment The technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.
Ring Roller Mill Machine for Silica Fume is wide, simple and convenient operation, but during the pulverization process, there is often a case where the crushing effect is different.
The crushing effect is mainly affected by the following factors:
The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.
When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
ALPA activated carbon RING ROLLER MILL MACHINE for Silica Fume Case Sharing: This customer is a research institute Dalian, which requires ultrafine pulverizing activated carbon during research. Investigate a number of domestic manufacturers, and finally choose to cooperate with our AlPa and purchased a Ring Roller Mill Machine for Silica Fume.
1, and the filter dust removal equipment is installed. For the dust generated by the high-temperature pulverizer, foam dust removal, wetting agent dust removal, ultrasonic atomization technology, composite filter bag dust removal, folding dust release bag, wide spacing electric precipitator dust removal. The user can also consider the overall performance of dust removal, so combined dust removal is used.
2. Due to the mild leakage during the production process, the dust will appear, causing pollution to the work area. Therefore, the user needs to guarantee the sealing property of the pneumatic grinding machine. 3, increase the humidity of the equipment work area, strengthen ventilation,To store fire equipment, you can avoid a lot of dust inhaling the harm caused by the human body.
4. Production enterprises should be equipped with corresponding protective supplies as required for air compressor operators. The operators should also wear protective supplies in accordance with regulations.
5, do a good job in the maintenance and management of existing dust equipment, guarantee its normal operation and use dustproof.The maintenance management of high temperature crushers seems simple, and actual operation requires good attitude and habits.
Users who want to view crusher related information can also log in to our website directly!
