Environmentally friendly Ring Roller Pulverizer for API EXCIPIENTS has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the mechanical processing and manufacturing industry in the stage has gradually replaced the traditional rough mechanical processing. Production has become a new leading leading to the implementation of technological innovation upgrades at this stage.
Ring Roller Pulverizer for API EXCIPIENTS is mainly used for more refined materials. The pulverized particle diameter is 1.5 to 0.005 mm, and the crude material is sieved. The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settle more in the air than in the water. Moreover, the density and viscosity of the air varies with temperature and pressure.
In order to cause air flow, wind pulverization equipment typically requires an appropriate fan (exhaust or blast).
When the airflow is classified, the fine particles are typically taken away by the airflow. In some cases, the raw material is sent to the gas stream into a pulverized device.
It is well known that the load of solid particles in air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration of the solid in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement.
The speed required to move the particulate material in the horizontal and vertical directions is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for the density 1.5 of the pulverization coal per centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments.
In the rising airflow, the airflow speed required to suspend a certain density and particle size is greater than the calculated value of free settling, which is due to the uneven distribution of the airflow along the pulverizing chamber portion.
The RING ROLLER PULVERIZER for API EXCIPIENTS has a wide comminuted range, high pulverization efficiency, high pulverization precision, accurate cutting particle size, and good stability.
AlPa Trimage Materials Ring Roller Pulverizer forAPI EXCIPIENTS case sharing: The company requires a three-dollar material ultrafine pulverizer, and our AlPA's Ring Roller Pulverizer for API Excipient is more well-known in the industry.There is a lot of proportion in the industry.Through experiment, the company purchased a Ring Roller Pulverizer for API EXCIPIENTS of our company.
Technical parameters:
Production capacity: 5-10kg / h
Super Ring Roller Pulverizer for API EXCIPIENTS operating procedures
1, need to bootCheck if the lubrication is oil.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.
If there is related requirements, please call us!
