Vibration Pulverizer for Carbon Microsphere is an industrial equipment. With the development of society and the needs of people's lives, the demand for various fine powder is increasingly demanding in the needs of society. It is increasingly high, and the application of classification machine is also more extensive.
The Vibration Pulverizer for Carbon Microsphere is a speed, collision with each other, collide with the target, and collide with the target.
Generally, the high-speed airflow accelerated pulverized solid particles have the following three ways:
(1) Airflow particles accelerate nozzle: After the airflow and the particles are mixed, the particles can be obtained. Very high speed (almost the same speed of airflow speed), but the material wears in the nozzle in the nozzle, rarely used in practical applications.
(2) Syringe Acceleration Particles: High Speed \u200b\u200b(Ultrasonic Speed) airflow and particles mix accelerate in the mixing tube, the particles obtain a higher speed, but the material is severe to the mixing tube.
(3) Free airflow acceleration particles: particles enter the high-speed airflow in the form of freely drop, only the high-speed air flow is passed through the nozzle and the wear is small.
ALPA Sulfate Vibration Pulverizer for Carbon Microsphere Case Sharing: The customer is a Saudi company, which needs to be graded for potassium sulfate, and investigate the international powder equipment company. Finally, we chose our AlPA classifier equipment.
In general, there are some sounds in the operation. Vibration Pulverizer for Carbon Microsphere will definitely have broken sounds when crushing the raw materials, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.
1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced. 2. There will be noise during the pulverization process. The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.
3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.
The company has consistently follows the standard management, puts quality in the first production and service policy, providing customers with confidence and weighing airflow crusher products and services.
