The people currently used in daily life are also more, Cell Pulverizer for Rubber Additives are smashed into standard size, usually smashed into micrometers, usually our equipment is With multiple devices, it is usually composed of coarse, fine powder, or a wind device or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.
CELL PULVERIZER for Rubber Additives production lines typically have pulverizer, bucket hoisting machine, storage box, vibrating feeder, ultrafine mill, frequency crusher, cyclone powder collector, pulse dust removal system, high pressure Air blower, air compressor, electrical control system and other components. Eliminates the infrastructure construction link, saving overall production costs, reducing material consumption. In addition, crushing and grinding operations can also be completed, reducing equipment and minimizing cost investment.ALPA Desulfurizer Cell Pulverizer for Rubber Additives Sharing: The company is a high-tech company that requires a desulfurizer crusher, investigating a number of powder equipment manufacturers at home and abroad, and finally chose our alpa Cell Pulverizer for Rubber Additives.
Technical parameters:
Finished particle size: 200 mesh 90% By
Production capacity: 4-5T
1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.
2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time, ensuring production quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.
6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) cannot be filledExcessive grease, otherwise the temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.
If there is a need for use on Cell Pulverizer for Rubber Additives and questions, please contact us AlPa,
