Hammer Mill Machine Of Whole Grains is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
Crushing products except for particle size It also has the characteristics of narrow particle size distribution, smooth particle surface, high granular shape, high purity, high activity, good dispersibility. Since Hammer Mill Machine Of Whole Grains produces a Juromon cooling effect during the crushing process, it is also suitable for low melting point and ultrafine pulverization of thermal materials.
The gas-solid ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated. When the particle size of the feed is pulverized, the particle size of the feed is more stringent.
When the titanium powder is pulverized, when the calcined material is pulverized, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70, and cannot exceed 2-5 mesh.
ALPA Water Atomization Feni50hammer Mill Machine of Whole Grains Case Sharing: This customer needs a device that can make ultrafine pulverized metal powder. Finally, we purchased our AlPA CSM710-V mechanical grinder.
Production capacity: 200-250kg
Hammer Mill Machine of Whole Grains Causes and solutions can be carried out from the following aspects:
1, overhaul Mounting of hammer in assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.
The company can provide free experiments and testing, and provide 24-hour consultationInquiry service, welcome.
