In this economically booming area, many people know that Cell Pulverizer for Tail Sand, crusher technology is in a leading position in the same industry.
Cell Pulverizer for Tail Sand is widely used in chemical, food, medicine, drying and other production industries, and plays a certain role in these industries. In addition to the above industry, there are also industries such as minerals, paints, metallurgical, and even scientific research units need Cell Pulverizer for Tail Sand. Choosing the right Cell Pulverizer for Tail Sand, not only guarantee the quality of materials, but also bring direct economic benefits to your business.
ALPA Quartz Powder Cell Pulver For Tail Sand Case Sharing:
A mining company specializes in the development and production of stone-shaped sand, silicon fine powder,
company produces various models, various quality indicators Quartz sand and water washing stone sand is widely used in: glass and glass products, metallurgical manufacturing, cast steel, precision cast, furnace, refractory, ceramic glaze, ceramic billet, rubber, coating, etc. Guide, negotiate business!
Case parameters:
Product particle size: D100: 11.5UM
Hours Yield: 380kg
For long-term \"health\" of the equipment, we need to take some measures again. Protect them.
1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are different, the raw materials are different, the hammer screening gap needs to be adjusted; in the crusher, the crusher is not very good at the beginning, but after a period of time Work, the particles inside the crusher also changes; in the grinding machine parts, the hammer head is easily worn, and the gap between the hammer head and the screen is increased, and the yield is also declining, it is difficult to maintain.
Of course, in order to test the yield of a crusher, for some of the raw materials, for some screen holes, in order to determine the appropriate hammer sieve gap and suction, the useful life of the screen and the hammer can be obtained in a short time. Very high grinding efficiency data. However, in the production of feed grinding, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.
2. Cell Pulverizer for Tail Sand mainly needs reasonable useInverse glitch: Mainly to rush the side hair of the screen into the inside, greatly increase the friction, but this method is not used for a long time.After the globi polishing, the efficiency is lowered.It lasts for 30 minutes to 1 hour.
3. Put the friction piece into the Cell Pulverizer for Tail Sand: The friction piece has the effect of the material ring, but the effect is limited.First, the teeth of the friction plate are in front of the hammer head, the friction surface is small, and the hammer is long-lasting; if the sieve area is too small, the output screen area will be reduced.
For any of the equipment, daily maintenance can be performed, to ensure that the equipment can operate for a long time, so everyday is critical to the maintenance of Cell Pulverizer for Tail Sand.
For more consultation, please continue to pay attention to us, or inquire.
