With the demand of society and life, the demand for Ring Roller Mill Machine for Onion Particles is getting bigger and bigger, and the requirements for fineness, purity and pass rate are increasing. In the current market, there is a great development space.
Ring Roller Mill Machine for Onion Particles The temperature is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
ALPA Solid Mannin Ring Roller Mill Machine For Onion Particles Case Sharing: A food company requires large production of solid mannitol ultrafine powder. Many of the domestic powder companies have not found a crusher of the compound GMP standard food grade production. The general compound GMP standard pulverizer does not meet the large capacity required for the company. With our ALPA, the company purchased 1 Ring Roller Mill Machine for Onion Particles in our company. The demand for the large production of solid mannitol is met, which is satisfied with the GMP standard. Technical parameters:
Finished particle size: mannitol: greater than 710 um 7.34%
Production capacity: Mannitol: 2T
1. Make sure the quality of the crushing machine is not harmful: the real-time monitoring system is carried out to the real-time monitoring system, immediately observe the harm of grinding disc.
2. The grease oil does not meet the regulations: Analysis of the grease on time on time, ensuring that the grease oil exceeds the remarks.
3. The refrigeration system does not have a cooling effect: the cooling tower of the intake system is used to use a water cooler to use the continuous liquidity cooling circulating water to grease the heat production. When driving, when driving, touch the cooling tower with hand The oil pipe, the temperature difference is small, almost not, can be seen that the single cooling tower is not clearObviously, the heat exchange time of the cooling circulating water and the grease is too short, and 1 cooling tower is connected in series in the cooling column, and the double cooling tower is refrigerated, and the heat exchange time is extended.
