With the continuous advancement of pulverizer technology, Hammer Pulverizer of Polycrystalline Ternary has been familiar with people. The most popular crushing equipment is now the Hammer Pulverizer of Polycrystalline Ternary. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.
In the production process of crushing using Hammer Pulverizer of Polycrystalline Ternary, the ultrasonic air flow generated by the device can constantly collide between materials, and this supersonic airflow can also produce raw materials. A very good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.
ALPA pea protein Hammer Pulverizer of Polycrystalline Ternary case Share: This customer is a food company in Russia. After finding a lot of powder equipment enterprises, there is no suitable equipment. It has been affected the company's production and operation, and finally I saw the ultra-smash of pea protein before our website. Finally, through the incoming experiment, I finally determined the purchase of our company's Hammer Pulverizer of Polycrystalline Ternary. Technical parameters:
Finished granularity: 400 mesh
Production capacity: 1.5T
Hammer Pulverizer of Polycrystalline Ternary Troubleshooting:
1 It will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason,step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
Welcome everyone to inquire!
