Rod Pin Pulverizer of Feed Stuffing is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
Rod Pin Pulverizer of feed stuffing Unlike other crushers, it is a pulverized pulverizer for a crusher of the impact of the material, the impact of the material, the impact of shear, high-speed airflow, and the shock, friction and shear and other components. It has the following main features:
1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.
AlPa Kaolin Rod Pin Pulverizer of Feed Stuffing Case Sharing: This customer is a Kaolin Powder Company in India. The customer needs a grading equipment to select the kaolin ultrafine powder, and inspect a lot of companies. Find proper. Finally, our AlPA meets the customer needs for the classifier equipment provided. The set of equipment has reached 4T per hour.
In order to achieve better use, you must pay attention to the daily maintenance of Rod Pin Pulverizer of Feed Stuffing, pay attention to the following:
2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production. 4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The changing cycle of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (onTry) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.
Today, Rod Pin Pulverizer of Feed Stuffing is introduced to you, please find more information, please continue to pay attention to our website.
