Because Hammer Mill Machine For Edible Fungus is widely used in all walks of life, the research and development of classified machines at home and abroad pays great attention. In the current market, there is a great development space.
Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since Hammer Mill Machine For Edible Fungus generates a Juromon cooling effect during the pulverization process, it is also suitable for low melting point and ultrafine pulverization of thermal materials. Hammer Mill Machine for Edible Fungus is an important technical parameter and important indicator.
If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated.
When the particle size of the feed is smashed, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.
ALPA Activated Carbon Hammer Mill Machine for Edible Fungus Case Sharing: The customer is a research institute Dalian, which requires ultrafine pulverization of activated carbon during research. Investigate a number of domestic vendors, and finally choose to cooperate with our AlPa and purchased a Hammer Mill Machine for Edible Fungus.
Hammer Mill Machine for Edible Fungus's daily maintenance is a very important part, which introduces the maintenance method of Hammer Mill Machine for Edible Fungus.
1. When the machine starts or starts, the appropriate amount of grease should be applied to ensure its life. 2. Check if the screws and nuts of each component are tightened. Check if the belt is smashed, whether it is tight.
3, regularly check the reliability of the equipment, prevent accidents or accidents.
4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
6, electrical components and lines should be checked regularly, whether it is intact, and the ground is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.
The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.
