Turbo Mill Machine Of Shrimp Powder as a smashing main equipment, the role is also growing, in industrial sectors such as metallurgy, mine, chemical, cement, have a large number of raw materials and reuse waste every year It is necessary to use a classifier for processing. In the coking plant, sintering plants, ceramics factories, glass industries, powder metallurgy, etc., need to break the raw materials to the particle size required for the next job. In the chemical, power sector, the hierarchy, the raw material is broken, grind, increase the surface area of \u200b\u200bthe material, has created favorable conditions to shorten the chemical reaction of the material.
Turbo Mill Machine Of Shrimp Powder operates in compressed air, gas or high pressure overheating steam. Turbo Mill Machine Of Shrimp Powder has no movable parts, thus eliminating pollution caused by contact with external grinding media. It is also an ideal process for grinding thermal and waxy materials because wear heat is not produced. Turbo Mill Machine Of Shrimp Powder is used for fluid energy. Micronization and grading are carried out in a shallow cylindrical chamber. The high pressure air or steam is injected into the chamber by a specially designed nozzle placed on a peripheral wall.ALPA Carbon Turbo Mill Machine of Shrimp Powder Case Sharing: The company's production of static pressure graphite needs to be super finely pulverized to carbon. After multi-party investigation and experiment, finally selected our AlPA as a cooperative customer, we provide the Turbo Mill Machine of Shrimp Powder provided to the carbon pulverity, particle size range, yield, and so on.
Technical parameters: Finished granularity: D65: 200 目
Production capacity: 800-1000kg
Ultra-micro Turbo Mill Machine of Shrimp Powder uses air separation, heavy polishing The shear is used to realize the ultra-smash of dry materials, and are widely used in various industries. Let's take a brief introduction to its daily maintenance content.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearingsThe service life has a large relationship, which can directly affect the life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached, and it is good.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.
ALPA technology research and development crushing equipment has been applied in many actual engineering cases, providing basic information for objective understanding of jet grading technology.
