Since the 1980s, with the development of the national economy, more and more industries need to dry ultra-fine powder mills on materials, Cell Mill Machine with cobalt blue is the most effective One of the equipment. In my country, after 20 years of development, Cell Mill Machine With Cobalt Blue has been widely used in pesticides, food, medicine, fine chemical, electronic battery materials and other fields.
High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the power of the rotational speed of the Cell Mill Machine with Cobalt Blue, the thickness of the material is separated from the separation, the fine particle size of the pulverized wheel into the cyclone separator and dust removal, continues to be pulverized.
The pulverizer produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the pulverization requirements of the material. The crusher has a greater amount of treatment, energy saving, simple operation, and low maintenance costs.
AlPa Hardstone Powder Cell Mill Machine with Cobalt Blue Case Sharing:
A gypsum company is an integrated enterprise, production, sales, export, production, sales, export, production, sales, export, production, sales, export of sulfate powder Applied in building materials, molds, food, medicine, rubber, plastics, coatings and other industries.
The company adopts advanced modern production equipment and leading production technology, natural gypsum, natural plaster powder, desulfurized gypsum powder variety, high grade, quality, and export to all parts of the country, partially exported to Japan, South Korea, South Africa , Egypt and other countries are favored by users.
Case parameters:
Product particle size: 4-15 um
Horses Yield: 3-6T
Ultrafew Cell Mill Machine with cobalt Blue's correct usage:
1, ultrafi The crusher and power unit should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3It is consistent in the direction, whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
The technology of Cell Mill Machine with Cobalt Blue produced by AlPa makes the structure easier to make the classifier wear resistance.Friends needed to come to us!
