Rod Pin Crusher with Vermiculite

In many crushing methods, Rod Pin Crusher With Vermiculite has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

Rod Pin Crusher With Vermiculite has generally replaced traditional mechanical pulverizer in real production, and its characteristics are:

1. Simple structure, demolition Simple, convenient, easy, just one person can complete the operation, disassembly and packing.
2, elliptical pulverizing cavity design, less airflow resistance, so that the compressed air utilization reaches the highest and reduces loss.
3, Rod Pin Crusher With Vermiculite causes the finished product to purity, no impurities, non-pollutant materials due to its pulverization principle.
4, the pulverization is good, the particle size distribution is uniform.

The above is the application of the Rod Pin Crusher with Vermiculite in the industry.


ALPA Soybean Rod Pin Crusher With Vermiculite Case Sharing: The customer is a company in the Netherlands. The company needs ultrafine pulverization to soybean meal (after oily oil). Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance. Through the incoming experiment, the company chose our company's Rod Pin Crusher With Vermiculite.
ROD PIN CRUSHER WITH VERMICULITE How to control the size of the particle size?
The smaller the particle size of the raw material, the higher the pulverization efficiency, the greater the particle size of the raw material, then the pulverization effect is relatively low. In the case of crushing pressure and feed pressure, reduce the feed speed product will be finer, and improve the feed speed product will become thick. In the case of a feed rate, the particle size of the pulverized pressure is improved, and the pulverization pressure is reduced, and the product will become thick.

So the particle size control is the adjustment of the parameters during the pulverizer to achieve different pulverized fineness, and it is necessary to measure the relationship between the feed velocity and pressure before crushing and then determine the appropriate pulverization parameters.

ALPA technology research and development crushing equipment has been applied in many actual engineering cases, providing basic information for objective understanding of jet grading technology.