Turbo Grinder with Poly

Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Turbo Grinder With Poly can effectively improve the extent of the material, greatly improved productivity. Turbo Grinder with Poly is highly received, and the prospect is also optimistic about many people.

Turbo Grinder with POLY is in full closed state, the pulverized particle fine is better, the granular shape is good, the output is also large, the pulverization process is no dust production, and the material is purified by the purity after crushing, greatly saves raw materials. . Turbo Grinder with poly during the pulverization process, the effect of cell breakage can be achieved, so that the effective component dissolution of the medicinal material is greatly improved, and the drug effect is also more likely to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.

ALPA Pigments Turbo Grinder with Poly Case Sharing: This customer needs to use the pigment ultrafine pulverization equipment during its production. Through the ultrafine pulverization of the pigment to improve the product's quality, after many other types of equipment, we finally chose our Alpa's Turbo Grinder with Poly. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.

Technical parameters:

finished particle size: D90: 13μm;
Production capacity: 130kg / h


Turbo Grinder with poly installation notes

1, the classifier Host equipment such as wind turbines conduct preliminary inspections, there is an organic injury during transportation or long-term storage, see if there is no abnormality in the equipment and fan airways, turn the hierarchical impeller and the wind turbine spindle, and observe whether it is flexible.

2. Check the degree of fastening of the equipment pre-installed components, and must be added to the lubricating oil to be lubricated.
3, the mounting grading wheel should strictly prevent collision, classify the host, and the fan should be tested, and the level is specified by the gasket, and there is a basic requirements and the foundation fixation.
4, require the sealing pipe interface to configure the sealing gasket.
5, after the layout machine is installed, first observe the direction of grading motor.
6. When the control cabinet is installed, the corresponding relationship between the terminal sequence number and the equipment is carefully verified.
7. After the installation is complete,The car is running for 1-2 hours, and it is ready to tighten the loose bolt, carefully examine the accuracy and coordination of the equipment action.


I hope everyone can buy the airflow crusher product for the heart!