Since the 1980s, with the development of the national economy, more and more industries need to dry ultra-fine powder grinding materials, Pin Grinder with insoluble sulfur is the most effective equipment for achieving ultrafine powder mills. one. In my country, after 20 years of development, the Pin Grinder With Insoluble Sulfur industry has been widely used in pesticides, food, medicine, fine chemical, electronic battery materials and other fields.
The airflow classification is based on centrifugal force, gravity, inertial force, etc., produces different motion trajectories depending on the gas (usually air), gravity, and inertial force to achieve different particle sizes. Classification. PIN Grinder with INSOLUBLE SULFUR can be divided into static classifiers and dynamic classifiers according to whether there is moving parts. Pin Grinder with Insoluble Sulfur is getting better and better. Many industries need to control the particle size of fine powder.
ALPA lithium carbonate PIN GRINDER WITH INSOLUBLE SULFUR Case Sharing: This customer is a company that is produced, selling lithium carbonate, lithium hydroxide, potassium sulfate, and salt, found in the process of selling carbonate, found The current customer needs is ultrafine powder of lithium carbonate, so it has upgraded the production line of lithium carbonate, purchasing our Alpa's multiple PIN GRINDER WITH INSOLUBLE SULFUR.
Technical parameters:
Finished granularity: D50: 5-8μm
Production capacity: 450kg
For PIN Grinder with insoluble sulfur blocking troubleshooting, Xiaobian talks Inspect, I hope to have some reference roles. Crushes blockage is the most common fault of machinery.
It may be one of the most common failures in mechanical design, but because improper operation can cause many faults.
(1) The feeding speed is too fast, the load is increased, causing clogging. During aquaculture, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. This should be reduced or closed immediately, but it can also be controlled by increasing the feed speed to control the feed speed. Because the speed is fast, the load is large, the load fluctuates great. Therefore, the current of the rolling mill is generally controlled around 85% of the rated current.
(2) The unloading tube is inserted or the interference is too fast, and the universal crusher is blocked, and the delivery device does not match, resulting in weakening or calm of drainage tube. In order to find faults, we must first clarify the export transport equipment, do not change, adjust the amount of feed, and the normal operation of the equipment.
(3) The water content, aging, screening, crushing and sealing material of the hammer hammer are too high, and the general grinding will be blocked.It is necessary to regularly update the working status of the hammer aging and the serious aging, and check the screen regularly.Improve the production efficiency of universal grinding machines, improve the reliability of non-blocking and grinding.
