We all know that Rod Pin Crusher With Magnesium Hydroxide is a strong airflow pulverizer, many stubborn hard materials have been cut into a uniform block,
ROD Pin Crusher With Magnesium Hydroxide is easy to operate, it is convenient to maintain, which has a high grinding speed in the same product. At the same time, low energy consumption is the lowest in similar products. Products having the same particle size do not have functional, flammability, explosive, and oxidative materials that have particulate formation and particle dispersion, and oxidative materials can be used as a medium to achieve a closed pulverization and inertia. The loss of use of sex gas circulation is low. Negative pressure production can effectively reduce dust pollution, improve the working environment, compact structure, and seamless welding technology internally, which is easy to mechanically maintain and mechanically cleaning.
Since the high pressure gas is ejected from the nozzle, the gas stream causes the animal material to collide, shear, and friction, thereby achieving the crushing effect. Since the gas and the high speed of the animal material have a large centrifugal force. Under the effort of galvance, the crude particles were sent to the crushing room for multiple comminution, and the fine powder was discharged from the center exit.
ALPA Corkson Rod Pin Crusher With Magnesium Hydroxide Case Sharing: The company is a professional manufacturer of active biological extracts. It is necessary to meet the ultrafine pulverizer to meet the requirements of GMP. The Rod Pin Crusher with Magnesium Hydroxide purchased our Alpa.
Technical parameters:
Finished granularity: 100 full pass
Production capacity: 120kg
Now let's talk about Rod Pin Crusher With Magnesium Hydroxide's common fault exclusion.
ROD PIN CRUSHER with MAGNESIUM HYDROIDE Troubleshooting:
1, feed back irrigation: Improper tunnel adjustment, pipeline blockage, screen jam, dust bag gas permeability or severe wear, hammer surface is serious Waiting, etc. will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong, the corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, the bottomThe feet are connected to the screws.According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
