Vibration Mill Machine With Yellow Pigment is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.
Which factors will affect Vibration Mill Machine WITH YELLOW PIGMENT uses performance parameters?
The following is a detailed description:
1. Feeding granularity control
Most Vibration Mill Machine With Yellow Pigment has a certain upper limit requirement for feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium
Currently, the working medium of Vibration Mill Machine With Yellow Pigment is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed
Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Granular limit
Vibration Mill Machine with Yellow Pigment In the pulverization process, as the material particle size is reduced, the crystallization and intensity of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material specific surface area is increased, and the surface activity of particles increases, and the particles are agglomerated and grinding.In a dynamic balance, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.
ALPA Potassium Permanganate Vibration Mill Machine with Yellow Pigment Case Sharing: This customer is mainly engaged in the development of high energy chemical energy development. The study needs a device that can make ultraf fine pulverized in high potassium permanganate. Finally, we bought a Vibration Mill Machine with Yellow Pigment in our AlPa.
Technical parameters:
100-325 目
Production capacity: 5kg
Let me introduce the method of operating the Vibration Mill Machine with Yellow Pigment.
1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.
The above is the Vibration Mill Machine With Yellow Pigment, you can make a brief understanding, you need to purchase eddy current pulverizer, disc air crusher, users of ultrafine crusher products, please contact us [123 ]
