How Shandong cleaning jet mill pulverizer manufacturers medicine
1, cleaning of the pulverizer nacelle. Grinder cabin is what we call "smash warehouse" items are crushed to crush the barn, so the focus is cleaning the site. The main portion of cutting chamber and the motor is fixed inside the nacelle "head" portion. The above screw head consists of a stainless steel, provided with a wrench to loosen the screws herein, the win blades, the nacelle and the motor can be separated, the separation when the attention of the link line pull down. Cutting chamber cleaning means involving special wrench, brush and the like. Mill equipped with a special wrench used to facilitate disassembly just the tip. HTC medicine grinder is also equipped with special cleaning brush. Please wash with water when cleaning the grinder Chinese medicine, do not use other cleaning agents, can use up detergent for cleaning, use a dry cloth to dry after washing.
2, other parts of the abrasive cleaning: mainly with the screw cap and the outer member cleaning mill. These places can be used to brush clean brush brush gently, if necessary, with water or detergents to clean it. The wet product water, and then poured into the washing liquid, the washing liquid and stirred uniformly between the water, the surface can be uniformly covered with the product, so that less dirt will slowly stick in this process the Chinese medicine grinder. Small household grinder can be soaked brush, start brushing the surface and interior, such cleaning will make the most of the dirt out of the product in an instant, whether surface or internal. After this process is complete, rinse Take the mill, has fallen off the dirt to avoid re-contamination of the product, because the phenomenon is caused by attachment of second degree is relatively poor.
Another method is to use a washing machine Chinese medicine grinder washing, the washing machine filled with water and detergent, and the need to clean the grinder into which medicine. After cleaning machines began to operate, and there's water will produceStrong fluid power, which makes a large amount of dirt inside the pulverizer and is not easy to attach it to the top due to the rapid flow of water, and the effect is also very ideal. After the Chinese medicine crusher, clean it with water, and then carry out relevant drying work, so as not to cause unnecessary losses in too long.
