We all know that Cell Mill of Cerium Oxide is a very strong airflow crushing equipment, many stubborn hard materials that encounter the crusher will be cut into a uniform block of pieces,
When Cell When the Mill of Cerium Oxide screen material, the screen has good smoothness under the pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without the need for rotating components. Through the precise control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors.
The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization zone, the strongest, and the strongest is separated under a high-speed rotary pulverized turbine. The fine particles that satisfy the particle size require the gap of the pulverizing wheel into the cyclone separator or dust collector. After collecting, some fine particles of the crude particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.
Technical parameters:
finished particle size: D50 less than 325 mesh
Production capacity: 300kg
