Ultra-Micro Turbo Mills Manufacturer is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the Erfai crusher is fine, and the granules are delicate, affordable.
What is the design structure of Ultra-Micro Turbo Mills Manufacturer?
Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure gas stream flows from the leaf, the fine particles are ejected. Since the blade of the rotary guiding blade is designed as a bend, the inlet cross-section is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed is increased, and the rotational flow is conducive to classification.
The hierarchical point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder is increased; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, and the particle size of the Ultra-Micro Turbo Mills Manufacturer can be adjusted. The gradular weight product is up to D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micro-micro products.
The setting of the control ring is to ensure a suitable cross section between the control ring and the jet fine particles, control the stability of the airflow flow. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, so a residual tight is designed to maintain the stability and balance of the graded indoor airflow.
El Piececarbonate Ultra-Micro Turbo Mills Manufacturer case share: This customer is a company, selling lithium carbonate, lithium hydroxide, potassium sulfate, and salt, etc. During the sale of lithium carbonate, it was found that the current customer needs of the ultrafine powder of lithium carbonate, so it was upgraded for the production line of lithium carbonate, purchased a number of Ultra-Micro Turbo Mills Manufacturer of our El Pie.
Finished particle size: D50: 5-8μm
Production capacity: 450kg
Users who want to view crusher related information can also log in to our website!
