Impact Pulverizer as a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from a few tens of grams of trace test to hundreds of tons Large production, Impact Pulverizer With its narrow range: the particle size distribution is narrow, the average particle size is fine; the powder has good shape, the product is high; suitable for low melting point, thermal drugs; good sealavish, less pollution; smash-mixing A few major characteristics of dry online operations have been widely recognized by the company.
What is the design structure of the Impact Pulverizer?
Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The grading point can be continuously adjusted, and the granularity of the Impact Pulverizer of the performance can be adjusted. The granular weight of the graded product can reach D97 ≤ 3≤150 microns, suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.
ALPA Graphite Impact Pulverizer Sharing: The customer is a research institution that needs to be superbly pulverized in graphite during its research. By repeatedly to select the incoming end of the experiment we alpa the impact pulverizer.
Technical parameters:
Finished granularity: D50: 10-30μm
If you have any use of Impact Pulverizer, you are welcome. Contact, a,
