Most of the product production and processing of the current stage use Turbo Crusher of Polyester, Polyamide's product pulverization is one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.
What are the advantages of Turbo Crusher Of Polyester, Polyamide? Let's take a look at it. First, the pulverized particle size is small, the distribution is uniform. Because Turbo Crusher of Polyester, the power distribution on the Polyamide material is quite uniform. The ultrafine pulverizer is an apparatus for ultrafine pulverization of dry materials by using air separation, high pressure comminution, shear and other techniques. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material collection system, etc. The setting of the grading system not only strictly limits large particles, but also avoids the occurrence of pulverization, thereby obtaining a uniform powder having a uniform particle size distribution. At the same time, the specific surface area of \u200b\u200bfine powder increases, and the amount of adsorption and solubility are also increased accordingly.
Second, reduce pollution, more environmentally friendly: ultrafine pulverization is carried out in a closed system, which avoids the pollution of fine powder to the surrounding environment, and prevents dust pollution products in the air. As a result, Turbo Crusher Of Polyester, Polyamide applies the technology into food and health products, which can effectively control the specific gravity of microorganisms and dust. The ultrafine pulverization speed is high and can be pulverized at low temperatures. Ultra-fine pulverization technology is smashed with ultrasonic air flow, cold grinding and other methods, which are completely different from the conventional pure mechanical pulverization method. After the gas fine particles are broken to the high-speed cyclone separator, the high-speed cyclone separator is broken, and the high-speed cyclone separator enters the coarse-grain separator, and then enters the coarse grain separation zone via the high-speed cyclone separator, and then enters the coarse grain separation area through high speed. Centrifugal separator.
Third, during the grinding process, there will be no local overheating phenomenon, and can even be smash at low temperatures, fast speed, and can be completed instantly.
Therefore, the bioactive ingredients in the powder can be minimized to produce the desired high quality products.
ALPA Graphite Turbo Crusher of Polyester, Polyamide case sharing: The customer is a research institution, in its research, the graphite needs to be superfined. Through multiple incoming experiments, we finally chose our Alpa's Turbo Crusher of Polyester, Polyamide.
Technical parameters:
finished particle size: D50: 10-30μm
Production capacity: 30-50kg
How to solve Turbo Crusher of Polyester, POLYAMIDE noise is too big?Let's take a look.
1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.
2. There is also noise during the pulverization.The cooling sleeve can be used to reduce the temperature, which can allocate water in the crushing chamber.
3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.
ALPA is a professional powder airflow mill manufacturer, complete model, quality assurance, high quality, sell well, easy to operate, powder airflow mill, welcome new and old customers to consult!
