Hammer Crusher's balance performance is good, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
Hammer Crusher Of Powder has a wide range of pulverized granularity, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.
The crushing effect is mainly affected by the following factors:
The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.
When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
ALPA cobaltate Hammer Crusher of Acid Powder case share: Beijing Lithium Electric Materials Company purchased a Hammer Crusher of Acid Powder from our AlPa in 2020. Ultrafine pulverizer for lithium cobaltate, the company has three particle size requirements for lithium cobaltate, requires a device to be simultaneously satisfied. In response to the company's unique needs, our ALPA engineers have been working hard to customize a Hammer Crusher Of Powder. The pulverizer can meet the production requirements of multiple particle size sections, equipped with subsequent airflow classifier systems, and can be sorted by different particle size products.
Finished particle size: lithium cobaltate small particles D50: 3-6 μm; lithium cobaltate large particles: 50: 8-20 μm; Trimetimeterials D50: 6-13μm;
Production capacity: Lithium cobaltate small particles: 250 kg of lithium cobalt acid lithium large particles: 500KG ternary: 500kg
Before using it, pay attention to it, you must pay attention to use, operation, make it damage rate To the lowest, what should I pay attention to before using Hammer Crusher's ACID Powder?
1, check if all fasteners are checked before useTighten and whether the direction of operation of the spindle is correct, so as not to damage the machine.
3, before adding the material to the pulverizer, it is not mixed to avoid damage to the grinding machine.
4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.
5. If there is any abnormality in use, it should be treated immediately to avoid more loss.
6, some parts should be checked regularly.If it is damaged, it should be replaced immediately.
ALPA produced Hammer Crusher Of Powder is a hard-quality device, which supports customization, equipment model, high efficiency, low energy consumption, easy operation, 24 hours can consult!
