In this economically booming area, there are many people who know the airflow pulverizer, and Rotor Mill of Tar Particles are in a leading position in the same industry.
The overall development trend of my country's material ultrafine crushing technology is to make a more ultra-fine pulverized equipment to various types of ultra-fine pulverization equipment towards low-cost, high efficiency, strong dispersibility, good dispersibility and stable quality. High technical requirements.
Rotor Mill of Tar Particles Engineering technology will need more and more high-purity ultrafine powder, and ultrafine powder technology will play an increasingly important role in high-tech research and development. Although high-purity ultrafine powder is prepared by chemical synthesis, it is too high, which is extremely difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies. Its development also depends on the progress of the relevant technology.
Therefore, the main development trend of ultrafine pulverization equipment has been developed with fine pulverized equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high handling capacity. Integrated development of equipment and process research.
Ultra-fine pulverization and supporting equipment must be adapted to specific bored features and product indicators, and the scale model must be adapted.
ALPA Sodium Rotor Mill of Tar Particles Share: This customer is mainly engaged in high energy chemistry, hydrogen production and hydrogen energy development, special gas, fine chemical, environmental engineering, etc. The research institute requires a device that can be superfined with sodium chlorate. Find a domestic powder equipment enterprise. Finally, we bought a Rotor Mill of Tar Particles in our AlPa.
finished particle size: 100-325 目
Production capacity: 500kg
Let's take a look at the maintenance secrets of eddy current pulverizing chains!
Crusher Transmission Chain Protector should be intact, preventing personal injury accidents in the work in the work. Motor base fastening bolts are regularly checked, and the foundation must have sufficient steel to prevent the chain from joking or falling down due to basis, causing transmission failure. Check, repair, and maintenance of the machine, the power supply must be cut off and the sign is applied. It is strictly forbidden to extend the hand or other tools into the machine during the machine operation. Only after the machine is completely stopped, you can clean up and check the machine.
The cable in the pulverizer should have a protective casing.
During the operation, at least each class checks if the compressed air line is leaking, and the water water separation is discharged once. Check if the unloading door is leaking, the sealing strip is damaged, and the unloading linkage is closed when the door is closed.No in a dead position.Clean the residual material attached to the inner wall of the bucket once a week.Wash the chain, sprocket, and refresh the chain sprocket with diesel brushing.Clean the injector per month while cleaning the inner wall of the mixer and the residual attachment material on the cover.Monthly measurement of a mixed machine exit and finished package, the determination of the variation coefficient should select the shortest mixed product.
In addition, users also need to check whether the wire connection in the motor junction box is loose.Clean up the remaining machine attached to the inner wall of the mixer and buffer.Clean up the oil and water separation triple piece to ensure that the air path is smooth.
If you still have questions, you can directly contact the ALPA Technology Co., Ltd., warmly welcome users to come to consult, our company equipment is manufactured, the size is complete, there is a suitable for you!
