In the classification operation of the industrial production at this stage, the use of Impact Mill Machine of Ferro Molybdenum Powder is mainly for the effective crushing of solid particles, and is the case in which we are more common in the product ultrafine pulverization. equipment.
Impact Mill Machine Of Ferro MolyBdenum Powder is precisely pulverized with ultrafine powder below the micron-level, especially high-end powder materials, and can provide high performance crushing effects that other forms of crushing equipment. Three different particle size ranges of more than three or more particle sizes can be obtained by cleavage, and the peak value is higher, and the additional value of powder raw materials is greatly improved; there is a wide range of applications in metal and non-metallic fields.
AlPa Quartz powder Impact Mill Machine of Ferro Molybdenum Powder case share:
A mining company specializes in the development and production of stone-shaped sand and silicon powder,
company produces various models, various quality Indicators of quartz sand and water-washing stone sands are widely used in: glass and glass products, metallurgical manufacturing, cast steel, precision cast, furnace, refractory, ceramic glaze, ceramic billet, rubber, coating and other industries, welcome to factory Investigation, guidance, negotiation business!
Case parameters:
Product particle size: D100: 11.5UM
Horses Yield: 380kg
Ultrafa Impact Mill Machine of Ferro MolyBDenum Powder's correct usage:
1, the ultrafine pulverizer and power unit should be firmly installed. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6Load work.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
