With the development of society, the application of Turbo Mill of Oyster has become more large.
Turbo Mill of Oyster's advantage, a small amount of wear-resistant components made of special hard wear raw materials, small size, light weight, convenient replacement of accessories. Turbo Mill of Oyster compressed air is dried, and the material has repeatedly collided, friction, and shear in the intersection of the multi-shaped high pressure airflow. The damaged material moves with the rising airflow to the cascading area under the exhaust. The low temperature failure is composed of silo, mechanical failure, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc. After the damage material is cooled and embritful, it is easy to destroy at low temperatures, and the destruction effect is achieved by repeated impact, collision, shear, and conflict between materials and materials. Turbo Mill of Oyster has a high-speed blowing of 20m / s, which affects other high-speed motion. Due to the large gas flow, the material impact strength is high, the grinding efficiency is high, the motion of the spray gun and the large axial movement of the cyclone data are minimized, and the impulse and metal wall wear are reduced. Since the air under the crushing chamber grinds the bottom of the conical bottom, the bottom portion enters the nozzle in the crushing chamber. The cone data can also be used for high-speed airflow nozzles, eliminating damage, blind spots, and data under spherical media and crushing rooms in time. The rolling of the cylindrical sphere, the irregular effects of the media, and the stratigraphic data, and the need for double-effect grinding, so that the grinding product is very thin and the particle size is uniform.
ALPA Pigment Turbo Mill of Oyster Case Sharing: This customer needs to use the pigment ultrafine pulverization equipment during its production. Through the ultrafine pulverization of the pigment, improve the quality of the product, after many other types of equipment, finally chose our AlPa Turbo Mill of Oyster. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range. Technical parameters:
Finished granularity: D90: 13μm;
Production capacity: 130kg / h
1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Do not allow metal hard materials to be mixed, so as not toDamaged tools or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping.If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged.If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage.Be sure to tighten the cover to connect the handle to avoid accidents.
The Shan Dong Alpa is a scientific and private enterprise producing various airflow pulverities, integrating development, manufacturing, and application.The main product model has airflow pulverizer, airflow mill, pharmaceutical gas flow pulverizer, disc air pulverizer, eddy current pulverizer.
